RU & RUF - Desiccant Rotor Cassettes Available in cassette form, the D-Max silica gel rotor now enables dew points as low as minus 60°C to be achieved using an industrial air handling unit. The rotor cassette becomes an integral part of the air handling unit, thereby eliminating unnecessary duplication of system components. Available for process system airflows from 1,000 m³/h to 250,000 m³/h the cassette includes the silica gel desiccant rotor, rotor drive system, radial and peripheral seals. Cassettes are fabricated in stainless steel and aluminium and are supplied for both Consorb or Recusorb configurations. Reactivation is achieved using natural gas, LPG, steam, hot water and electric - or a combination of two (design & supplied by the AHU manufacturer).
RZ & CZ - Industrial Desiccant Dehumidifier Industrial dehumidifier using desiccant technology for chemical, pharmaceutical and food manufacturing processes, large warehouses, cold stores, ice rinks and sports halls.   Manufactured in Aluzinc, Recusorb RZ units include internal heat recovery as standard. Consorb CZ Series are particularly suitable for deep drying applications. Units are available with electric, steam, direct fired gas or hot water reactivation heaters. As standard, all RZ & CZ dehumidifiers are supplied with G4 air inlet filters, process and reactivation fans, reactivation heater, D- Max desiccant rotor, electric control panel and PLC C2 with fully integrated capacity control system. Capacity control options include two-step, multi-step binary or full PI linear control using either EH4, EH3 or an external BMS control signal. Available options include:- Stainless steel chassis (S2333 or S2343) Internal ‘Armaflex’ insulation (19 mm or 32 mm) Fan motor frequency inverters Inlet bag filters to F7 SSCR-H or SSCR-Cl rotor PLC C4 with Modbus TCP/IP protocol
DC & DR Series Desiccant Dehumidifiers Industrial desiccant dehumidifier range for the flood & water damage professional, temporary humidity control, museums, research laboratories, silo headspace conditioning, dry air stores and small production processes. Manufactured from 2333 stainless steel as standard, these industrial dehumidifiers are available in three configurations; Aquasorb (A30), Consorb (DC) and Recusorb (DR). All units include our high capacity D-Max ceramic silica gel rotor. On single phase units, reactivation heaters utilise positive temperature coefficient (PTC) thermistor technology and are self regulating for maximum safety and energy efficiency. Three phase units use resistive type heaters. All units include Auto-Manual mode switching and are pre-wired for simple humidistat connection via an Amphenol plug.
R - Series Desiccant Dehumidifiers Mid-range industrial desiccant dehumidifiers for dry air storage, cold stores, sports halls, museums, clean rooms, pneumatic conveying and process air conditioning systems. Manufactured in 2333 stainless steel these units include internal heat recovery, electric reactivation and Auto/Manual mode switching. Pre-wired for for two 2 step binary control (from EH4 2 step controller) as standard, units are also available for linear capacity control (from EH3 PI controller or BMS control signal). The R Series is supplied with the high capacity D-Max ceramic-silica gel rotor, G4 panel filters, reactivation heater, process and reactivation fans and all essential controls. Also available with steam reactivation.       
Desiccant Dehumidifiers from DST
Flexisorb (RF & CF) - Industrial Desiccant Dehumidification Systems Developed to meet the varying needs of the process industry, the Flexisorb range offers a series of custom-built compact industrial dehumidification systems. Designed around our desiccant rotor, units are configured as either ‘Recusorb’ or ‘Consorb’ principle, depending on the application. Dewpoints as low as minus 60°C can now be achieved in a single pass.
Desiccant Dehumidifier Model CZ 082 Desiccant Dehumidifier Model RZ 102 Flexisorb RF 122 Desiccant Dehumidifier
Manufactured using sturdy aluminium frames with double skin insulated Aluzinc panels with 50 mm fire resistant mineral wool (environmental class C4). Each module is supported independently on an Aluzinc frame.
RZ - Flex Industrial Desiccant Drying Systems Specifically designed to compliment the RZ series, bolt on modules are available. Modules include:- Pre-cooling & post-cooling (chilled water) Pre-heating & post heating (hot water & steam) Process fan - plug type, direct driven by 2-pole motor Filters to F7 (F85)
RZ81R Flex: Modules shown - filter, pre-cooler, pushing fan, RZ081R, post cooler
© Copyright    Humidity Control Systems Ltd    Tel: 0044 (0)1522 753722
Model DR 10 Model DR 10 Model DC 10 Model DC 10 Model DR 20B Model DR 20B Model DR 30D Model DR 30D Model DR 31 T10 Model DR 31 T10 Model DC 31 T10 Model DC 31 T10 Model DC 31 T16 Model DC 31 T16 Model DR 40 T10 Model DR 40 T10 Model DR 40 T16 Model DR 40 T16 Model DR 50 Model DR 50 Model DC 50 Model DC 50 Model R 060 Model R 060 Model R 51/61 Model R 51/61 Model RL 71/71L/ICE Model RL 71/71L/ICE Model RZ 081 Model RZ 081 Model RZ 101 Model RZ 101 Model RZ 102 Model RZ 102 Model RZ ICE Model RZ ICE Model RZ Rental Model RZ Rental RU Rotor Cassettes RU Rotor Cassettes Model AQ30/31 Model AQ30/31 RUF Rotor Cassettes RUF Rotor Cassettes EH3 Controller EH3 Controller EH4 Controller EH4 Controller Model DC 20 Model DC 20 Model DC 30 T10 Model DC 30 T10 Model DC 30 T16 Model DC 30 T16 Model CS 5/CS 5L Model CS 5/CS 5L Model CZ 082 Model CZ 082 Model CZ 102 Model CZ 102 Model CZ 102L Model CZ 102L Model CZ 104 Model CZ 104 Model CZ ICE Model CZ ICE Model DR 10 MH1 Model DR 10 MH1 Model RL 60/60L Model RL 60/60L Model CZ HW Model CZ HW Model RL 61/61L/ICE Model RL 61/61L/ICE Model RLZ 82 Model RLZ 82 Model RLZ 104 Model RLZ 104 Desiccant Dehumidifier Model RL 61R RU152 Silica Gel Rotor Cassette more on Flexisorb
RU & RUF - Desiccant Rotor Cassettes Available in cassette form, the D-Max silica gel rotor now enables dew points as low as minus 60°C to be achieved using an industrial air handling unit. The rotor cassette becomes an integral part of the air handling unit, thereby eliminating unnecessary duplication of system components. Available for process system airflows from 1,000 m³/h to 250,000 m³/h the cassette includes the silica gel desiccant rotor, rotor drive system, radial and peripheral seals. Cassettes are fabricated in stainless steel and aluminium and are supplied for both Consorb or Recusorb configurations. Reactivation is achieved using natural gas, LPG, steam, hot water and electric - or a combination of two (design & supplied by the AHU manufacturer).
R - Series Desiccant Dehumidifiers Mid-range industrial desiccant dehumidifiers for dry air storage, cold stores, sports halls, museums, clean rooms, pneumatic conveying and process air conditioning systems. Manufactured in 2333 stainless steel these units include internal heat recovery, electric reactivation and Auto/Manual mode switching. Pre-wired for for two 2 step binary control (from EH4 2 step controller) as standard, units are also available for linear capacity control (from EH3 PI controller or BMS control signal). The R Series is supplied with the high capacity D-Max ceramic-silica gel rotor, G4 panel filters, reactivation heater, process and reactivation fans and all essential controls. Also available with steam reactivation.       
RZ81R Flex: Modules shown - filter, pre-cooler, pushing fan, RZ081R, post cooler
DC & DR Series Desiccant Dehumidifiers Industrial desiccant dehumidifier range for the flood & water damage professional, temporary humidity control, museums, research laboratories, silo headspace conditioning, dry air stores and small production processes. Manufactured from 2333 stainless steel as standard, these industrial dehumidifiers are available in three configurations; Aquasorb (A30), Consorb (DC) and Recusorb (DR). All units include our high capacity D- Max ceramic silica gel rotor. On single phase units, reactivation heaters utilise positive temperature coefficient (PTC) thermistor technology and are self regulating for maximum safety and energy efficiency. Three phase units use resistive type heaters. All units include Auto-Manual mode switching and are pre-wired for simple humidistat connection via an Amphenol plug.
Desiccant Dehumidifiers from DST
RZ & CZ - Industrial Desiccant Dehumidifier Industrial dehumidifier using desiccant technology for chemical, pharmaceutical and food manufacturing processes, large warehouses, cold stores, ice rinks and sports halls.   Manufactured in Aluzinc, Recusorb RZ units include internal heat recovery as standard. Consorb CZ Series are particularly suitable for deep drying applications. Units are available with electric, steam, direct fired gas or hot water reactivation heaters. As standard, all RZ & CZ dehumidifiers are supplied with G4 air inlet filters, process and reactivation fans, reactivation heater, D-Max desiccant rotor, electric control panel and PLC C2 with fully integrated capacity control system. Capacity control options include two-step, multi-step binary or full PI linear control using either EH4, EH3 or an external BMS control signal. Available options include:- Stainless steel chassis (S2333 or S2343) Internal ‘Armaflex’ insulation (19 mm or 32 mm) Fan motor frequency inverters Inlet bag filters to F7 SSCR-H or SSCR-Cl rotor PLC C4 with Modbus TCP/IP protocol
Flexisorb (RF & CF) - Industrial Desiccant Dehumidification Systems Developed to meet the varying needs of the process industry, the Flexisorb range offers a series of custom- built compact industrial dehumidification systems. Designed around our desiccant rotor, units are configured as either ‘Recusorb’ or ‘Consorb’ principle, depending on the application. Dewpoints as low as minus 60°C can now be achieved in a single pass.
Desiccant Dehumidifier Model CZ 082 Desiccant Dehumidifier Model RZ 102 Flexisorb RF 122 Desiccant Dehumidifier
CALL US ON 01522 753722
Manufactured using sturdy aluminium frames with double skin insulated Aluzinc panels with 50 mm fire resistant mineral wool (environmental class C4). Each module is supported independently on an Aluzinc frame.
World Leaders in Desiccant Dehumidification
more on Flexisorb Desiccant Dehumidifier Model RL 61R
RZ - Flex Industrial Desiccant Drying Systems Specifically designed to compliment the RZ series, bolt on modules are available. Modules include:- Pre-cooling & post-cooling (chilled water) Pre-heating & post heating (hot water & steam) Process fan - plug type, direct driven by 2-pole motor Filters to F7 (F85)
RU152 Silica Gel Rotor Cassette Model DR 10 Model DR 10 Model DC 10 Model DC 10 Model DR 20B Model DR 20B Model DR 30D Model DR 30D Model DR 31 T10 Model DR 31 T10 Model DC 31 T10 Model DC 31 T10 Model DC 31 T16 Model DC 31 T16 Model DR 40 T10 Model DR 40 T10 Model DR 40 T16 Model DR 40 T16 Model DR 50 Model DR 50 Model DC 50 Model DC 50 Model R 060 Model R 060 Model R 51/61 Model R 51/61 Model RL 71/71L/ICE Model RL 71/71L/ICE Model RZ 081 Model RZ 081 Model RZ 101 Model RZ 101 Model RZ 102 Model RZ 102 Model RZ ICE Model RZ ICE Model RZ Rental Model RZ Rental RU Rotor Cassettes RU Rotor Cassettes Model AQ30/31 Model AQ30/31 RUF Rotor Cassettes RUF Rotor Cassettes EH3 Controller EH3 Controller EH4 Controller EH4 Controller Model DC 20 Model DC 20 Model DC 30 T10 Model DC 30 T10 Model DC 30 T16 Model DC 30 T16 Model CS 5/CS 5L Model CS 5/CS 5L Model CZ 082 Model CZ 082 Model CZ 102 Model CZ 102 Model CZ 102L Model CZ 102L Model CZ 104 Model CZ 104 Model CZ ICE Model CZ ICE Model DR 10 MH1 Model DR 10 MH1 Model RL 60/60L Model RL 60/60L Model CZ HW Model CZ HW Model RL 61/61L/ICE Model RL 61/61L/ICE Model RLZ 82 Model RLZ 82 Model RLZ 104 Model RLZ 104 © Copyright    Humidity Control Systems Ltd, Lincoln, LN8 5AB    Tel: 0044 (0)1522 753722
CALL US ON 01522 753722
World Leaders in Desiccant Dehumidification